SlapOS Home SlapOS

    SlapOS How To Deploy Software on Webrunner

    FINAL - Document showing how to deploy a software on the SlapOS Webrunner
    • Last Update:2020-05-26
    • Version:001
    • Language:en

    How To Deploy Software on a Webrunner

    This document will show how to deploy a software release on a SlapOS Webrunner. The process can be used for any software available on the SlapOS repository. Note, that the Webrunner is behaves like a SlapProxy (see SlapOS architecture) in that it contains a "mini SlapOS Master" that can provide a single software. Instantiating a Webrunner thus means, creating a smaller encapsulated system for then deploying another software inside. This is a useful approach for developing or hosting simple software releases.

    Table of Content

    • Deploy Software

    Deploy Software

    This section will show how to access a webrunner and deploy a software. The screenshots show deployment of the helloworld software release, also used to explain how to extend a software release.

    Access Webrunner

    SlapOS Interface - Webrunner Connection Parameters

    Locate the connection parameter on your webrunner service. You can access the webrunner using the url and logging in with init-user and init-password.

    Webrunner Landing Page

    Webrunner Interface - Landing Page

    On the Webrunner landing page, select Open Software Release

    Locate Software Directory

    Webrunner Interface - Locate Software Directory

    Locate the Software directory which contains a list of all software releases available on the webrunner. The list is based on the official SlapOS software repository.

    Select Helloworld Software

    Webrunner Interface - Select Software

    Select the Helloworld Software Release, then click Open Software.

    Confirm Helloworld Software

    Webrunner Interface - Confirm Software

    Click Save unless modification of the software release is required before deploying the default version. Then click the green arrow to start build and instantiation.

    Build Status

    Webrunner Interface - Deployment Status

    Once saved the deployment of the software will begin. Deployment can take anywhere from a few minutes (simple software, already compiled) to several hours. The log panel will inform of any errors or warnings encountered during deployment.

    Build Finished

    Webrunner Interface - Deployment Finished

    The top indicator Building State will show the result of (re-)building the software release. If it fails, errors are likley in software.cfg. The bottom indicator shows the Running State which indicates whether an instance could successfully be deployed from the software release. Errors in this part are likley to be found in

    Once both indicators switch to green, the software is deployed and ready to use.

    Inspect Services

    Webrunner Interface - Inspect Services

    Click on Services in the subheader to open the list of running services. The services defined in the software.cfg file should be running.

    Inspect Connection Parameters

    Webrunner Interface - Inspect Connection Parameters

    The connection parameters tab displays the parameters defined in the

    Thank You

    Image Nexedi Office
    • Nexedi SA
    • 147 Rue du Ballon
    • 59110 La Madeleine
    • France